Kinco Logo
 
 

2M412 Stepper Driver

  • Supply voltage: 12 ~ 40V DC
  • Ouput phase current: 0.2 ~ 1.2A
  • Control signal input current: 6~16mA
  • Weight(Net): 0.13kg
 

Function

The maximum supply voltage can reach 40V;
The bipolar constant current drive mode is taken, with a maximum drive current up to 1.2A per phase, which can drive any 42 series two-phase bipolar hybrid stepper motors with a current less than 1.2A;
The drive output phase current of a motor can be regulated through the DIP switch, to match motors of different specifications;
A DIP switch is used to set the automatic half current function of motors in statically locked status, which can greatly reduce heat dissipation of the motors;
A dedicated control chip is used, with a maximum of 256/200 subdivisions. The subdivision function can be set by the DIP switch, to ensure the best operation stability;
Supporting offline function so that the output current of a motor can be cut off if necessary;
Optical coupling devices are used for the isolation of the input circuit of the control signals to reduce interference of external noises.

Dimensions (Unit:mm)

下载失败

Technical Specifications

Model2M412
Supply voltage12 ~ 40V DC
Output phase current0.2 ~ 1.2A
Control signalVoltage:5V;Current:6 ~ 16mA;(when the voltage is 24V,there must be a resistance of 2K)
Cooling methodNatural air cooling
Operating environmentAvoid the environment with a great amount of metallic powder, oil mist, or erosive gases
Operating temperature-10℃ ~ +45℃
Operating humidity<85% (non-condensing or water drops)
Weight0.13Kg

 
 

Easy Solution

 
Facebook GooglePlus
 

tel
Sales:

+86 755 26585555-345

Technical:

+86 755 26585555-337

 
 
Copyright © 2015 Kinco Automation