Tel:+86 755 26585555-345
English
  • K2 Series PLC
  • K2 Series PLC
  • K2 Series PLC
  • K2 Series PLC
K2 Series PLC
K Series Economic PLC

Provide USB programming port, and can be powered by USB debugging, greatly improve the convenience.

DIO reuse patented technology, the same model can meet more applications.

4-Channel high speed counting input, 3-Channel high speed pulse output, 2-Channel RS485.

K2 Series

K2 PLC is a economic unit of K series (not expandable), basis of K5 series, cost-effective.




■ K2 Features

2019093010041378.png

   • Provide USB programming port, and can be powered by USB debugging, greatly improve the convenience.

   • DIO reuse patented technology, the same model can meet more applications.

   • 4-Channel high speed counting input, 3-Channel high speed pulse output.

   • 2-Channel RS485. baut rate up to 115.2kbps.

   • Support for real time clock.

   • Compact, saving installation space.








Transistor DIO(DI、DO Reuse) points

• Based on the DIO patent technology of Kinco, K2 CPU module provides DIO point, which can be used as DI or DO, and can be used by wiring without configuration.


USB programming port

• MicroUSB programming port is adopted to support USB2.0 and compatible with common MicroUSB mobile phone data cables.


High speed pulse counter

• Four high speed pulse counters each high speed counter allows up to 32 PV values to be configured and supports 32 "CV=PV" interrupts.

• Support a variety of modes, can be carried out single phase, double phase (Up/Down), AB phase (1 times frequency and 4 times frequency) count.

• The maximum counting frequency of CPU205 is 50KHz.The maximum counting frequency of CPU204/209 is 200KHz.


High-speed pulse output

• 3 high-speed pulse output channels, respectively Q0.0 Q0.1 and Q0.4, all support PTO (pulse train) and PWM (pulse width modulation) mode output.

• CPU205 maximum output frequency is 50KHz.CPU204/209 maximum output frequency is 200KHz.

• The software provides PLS (PWM or PTO) positioning control instruction group PFLO_F (follow instruction) and so on.


Serial communication port

• CPU module provides two RS485 serial communication ports, named PORT1 and PORT2 respectively, baut rate up to 115.2k.

• PORT1 can be used as both a programming interface and Modbus  RTU slave station protocol and free communication.

• PORT2 support Modbus RTU master protocol, slave protocol and free communication.






■ MODEL SPECIFICATION


ModelOrder numberSpecification
Supply voltageDIDODIOAIAOHigh speed inputHigh speed outputCOM portExtension moduleDimension
(L*W*H)
(unit:mm)
CPU205K205-16DRDC 24V66*relay4NoneSingle-phase, 2*up to 50KHz
2*up to 20KHz
Double-phase, 2*up to 50KHz
2*up to 10KHz
None2*RS485
up to 115.2kbps
Nonsupport90*97*70
K205-16DT66*transistor43
2*up to 50KHz
1*up to 10KHz
K205EX-22DT88*transistor6
K205EA-18DT8None11
CPU204K204ET-16DT86*transistor114
Single and double phase, Maximum counting frequency: 200KHz
3
Maximum output frequency: 200KHz
1*Ethernet
2*RS485 up to 115.2kbps
CPU209K209EA-50DX228*transistor+12*relay62Single phase, 2*up to 200KHz
2*up to 20KHz
double phase, 2*up to 100KHz
2*up to 10KHz
3
2*up to 200KHz
1*up to 10KHz
1*RS232
2*RS485 up to 115.2kbps
215*90*70.36
K209M-56DT3224*transistorNone2
Single and double phase, Maximum counting frequency: 200KHz
4
3*up to 200KHz
1*up to 10KHz

2*CAN

1*RS232

2*RS485 up to 115.2kbps
Up to 14


For more information, please download the newest Catalog and Manual.




© Kinco Electric(Shenzhen) Ltd.